[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] which outputs are the most appropriate to know the temperature





Please read the Getting Started manual.

Which outside temperature? 
Hourly outdoor environment temperature for a TMY is in the weather file. 
Exterior temperature of a wall depends on material used, construction, solar radiation, surface convection coefficient, interior teperature  and OD temperature.  It is calculated for every timestep in a simulation run.

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: motabmx1@xxxxxxxxx
Date: Tue, 18 Oct 2011 11:45:17 +0000
Subject: [EnergyPlus_Support] which outputs are the most appropriate to know the temperature

 
dear all,

Could anyone please tell me what outputs are the most adequate to know the temperature of an internal surface in my case a floor and the internal temperature of a zone?, is it possible to ask energyplus for the outside temperature in an specific day?

thanks

all




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___