[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: How to simulate that a window is being Opened



what is an EMS?

thanks


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Jean marais" <jeannieboef@...> wrote:
>
> EMS is not difficalt. There are lots of examples in the EMS documentation, example files folder and even on this forum. 
> 
> In your case you need a sensor object to monitor the mean zone air temp and an actuator that will change you venting schedule. And the description of the program logic. 
> 
> Program syntax is easy. Getting your ems to run is not going to take more than 3 days. Even when the simulation fails, the .edd file will be produced which will list all the actuator variable names you can use (useful for the correct syntax) and the step by step results of the program as far as it managed to run. The .edd file is produced if you define the "verbose" commands as shown in the examples. Per zone you're looking at about 25 lines of code. If you let all windows open based on the temperature of one "worst case" zone, 25 lines will only be needed once. I would recommend starting with this. 
> 
> Before tackling ems, make sure you can simulate with no windows opening and windows opening on a predeturmined "venting" schedule.   
> 
> That being said, there is a heck of a lot to learn about e+ other than ems.
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/