James,
Yes and no. I have tried this to IDFs with and without that object, and they do not have any effect at all.
Thanks,
Ery
On 10/24/2011 05:34 PM, Jim Dirkes wrote:
Dear Ery,
Have you manually selected outdoor air flow rate elsewhere, for example in Controller:OutdoorAir?
The Building Performance Team
James V. Dirkes II, P.E., BEMP , LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Ery Djunaedy
Sent: Monday, October 24, 2011 7:03 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] outside air in sizing:zone object
Folks,
I tried to enable/disable the OA air in the sizing:zone object, but it
has no effect on zone sizing result. I tried various combination, i.e.
different OA method (flow/person, flow/zone) and different values for
each, and get exactly the same result.
Is this a bug?
Thanks,
Ery
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___