Are you talking about a real building or something you dream up in your IDF?
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: matthew.sverre.anderson@xxxxxxxxx
Date: Fri, 28 Oct 2011 20:49:18 +0000
Subject: [EnergyPlus_Support] Fresh Air Issues
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: matthew.sverre.anderson@xxxxxxxxx
Date: Fri, 28 Oct 2011 20:49:18 +0000
Subject: [EnergyPlus_Support] Fresh Air Issues
Hey Everybody,
So I am currently trying to model a building for energy analysis. One glaring deficiency is that the building only pulls 100% fresh air, and there is no return air ductwork or economizer. This is obviously a glaring issue that I want to fix, however I am currently at a loss as exactly how to do this or if there are any work-arounds that will let me do it in a an easy manner.
Basically, my initial plan was to try to fenagle something in HVAC Templates where I set the fan CFM @ what it is measured at (ie 10,000 CFM) then set the max/min outdoor air @ the same CFM rate so that EnergyPlus is just assuming 100% FA all day, every day (such that it would be leaving via the relief air ductwork). Is this the best way to do it? In reality there is no relief air ductwork since the system just pressurizes the building and forces air out of the cracks etc...
I was then working on the .expidf and was curious if anybody had a good way of doing this using the AirLoop HVAC?
Basically: what is the best way to model a system with 100% fresh air and no return ductwork/relief ductwork
So I am currently trying to model a building for energy analysis. One glaring deficiency is that the building only pulls 100% fresh air, and there is no return air ductwork or economizer. This is obviously a glaring issue that I want to fix, however I am currently at a loss as exactly how to do this or if there are any work-arounds that will let me do it in a an easy manner.
Basically, my initial plan was to try to fenagle something in HVAC Templates where I set the fan CFM @ what it is measured at (ie 10,000 CFM) then set the max/min outdoor air @ the same CFM rate so that EnergyPlus is just assuming 100% FA all day, every day (such that it would be leaving via the relief air ductwork). Is this the best way to do it? In reality there is no relief air ductwork since the system just pressurizes the building and forces air out of the cracks etc...
I was then working on the .expidf and was curious if anybody had a good way of doing this using the AirLoop HVAC?
Basically: what is the best way to model a system with 100% fresh air and no return ductwork/relief ductwork
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___