[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Is it possible to ask e+ for an output of only 1 specific day?
Many thanks Dr Li for your help,
I am very grateful to you as you always answer my questions
thanks again
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, YuanLu Li <yli006@...> wrote:
>
>
> This is not an easy question to answer. You can set the time step to one, so the output may only have data at hourly intervals. The number of output data is reduced. But it does not mean that the time needed for calculation is also reduced, because a large chunk of air is extracted and filled in a zone may cause the temperature to change more per step, and take longer to converge. The result may be oscilating and diverge, and cause the system to crash. The condition depends on the internal load size, thickness of wall materials, and many other factors. Too small a timestep is also no good for thick walls. When the result is displayed at hourly interval, the value is averaged over a longer time, therefore, the 'quality' may be reduced. I use timestep 6 most of the time. (10 mins interval..) I like to see the value chage and settle, whenever a schedulve value or the input is changed. You can run the simulation at 10 min intervals and still display the output data hourly or mixed.
> Dr. Li
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: motabmx1@...
> Date: Fri, 28 Oct 2011 16:11:48 +0000
> Subject: [EnergyPlus_Support] Re: Is it possible to ask e+ for an output of only 1 specific day?
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> I have another question,
>
>
>
> in the timestep object I have specified 2 instead of 4 as recommended by e+, I did that so the information in output variable is reduces to half-hour intervals. Is this correct? or the time step object will have an effect in the quality of the results
>
>
>
> thanks all for yours replies
>
>
>
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, YuanLu Li <yli006@> wrote:
>
> >
>
> >
>
> > The problem is not with EPlus. Which day do you want and why? If you wanted to see the output on any day, just scroll the ResultViewer to the day you want. Some display program would give you the values as you move the cursor line to that time value. If you run only the DesignDay or the one day weather file, be careful. The single day or a few days result may have some initialization error for the first few days. So you will have to choose multiple runs and view the second or third sets of results. Repeat more times, if they are not the same. I can view the whole year's result at hourly or 10 minute intervals on a spread sheet plot as well. RVI selects the items to display, the rows show you all the data for the timestep. You can see up to 800 data points on each display screen. (one pixel per row.) This is what post processors are for.
>
> >
>
> > Dr. Li
>
> > To: EnergyPlus_Support@xxxxxxxxxxxxxxx
>
> > From: motabmx1@
>
> > Date: Fri, 28 Oct 2011 13:41:51 +0000
>
> > Subject: [EnergyPlus_Support] Is it possible to ask e+ for an output of only 1 specific day?
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > hi all,
>
> >
>
> >
>
> >
>
> > anyone knows if it is possible to ask for only one day from the outputs
>
> >
>
> >
>
> >
>
> > I would like to not have to go through out all year when I am only intersted in the internal room temperature of one zone at one specific day
>
> >
>
> >
>
> >
>
> > thanks all
>
> >
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/