[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] zone load simulation with energy plus





If you display hourly output values, the displayed number  is  averaged over the previous hour period.
 
In a cold night, the system is heading the zone in the morning just before the sun comes out.  The sun beam entering the building through a window can increase the temperature very fast, at 440W per square meter of window area.  When this is happinging during the same reporting hour period, it is normal to see heating and cooling values at the same time.
 
With shorter timestep reporting periods, you may see the values not displayed in the same period. 
 
I am not sure of the exact variable name.  Zone heating rate and zone cooling rate display the heating and cooling power required to heat and cool the zone to the theremsstat set temperature.  They are in the  .rdd file.

 Dr. Li  

 

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: darkeyes_bz@xxxxxxxxx
Date: Sat, 12 Nov 2011 16:26:34 +0000
Subject: [EnergyPlus_Support] zone load simulation with energy plus

 
Hello,
I want to use energy plus to simulate the thermal load of a multiple zone building.
Currently in the HVAC templates, I built a HVAVtemplate:Thermostat and five HVAVtemplate:zone:IdealLoadAirSystem for five zones.
SO in the output:variable, which variable describes the thermal load of each zone?
Is that the Ideal loads air heating rate/ ideal loads air cooling rate? I am not sure whether I should use this, since I found that even for an individual zone, there could be a heating rate and cooling rate at the same time at certain time period.
Thank you very much!




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___