[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Cooling SetPoint depending on inside and outside temperature?

Dear E+ Forum members,

Is it possible to set Cooling System to maintain 25C inside, but switching off if outside temperature is below 25C?

I am using HVACTamplate:Thermostat and Schdule:Compact to Set Cooling SetPoint to 25C, and also ZoneVentilation:DesignFlowRate to allow ventilation when outside temperature is below 25C but I would like to switch off Cooling system using only ZoneVentilation when Outside temperature is below 25C.

I am checking if I can do it with SetpointManager:MixedAir, NodeList, Controller:OutdoorAir, or SetpointManager:Scheduled:DualSetpoint or Zone HVAC Controls and Thermostats.

I would appreciate if you have any suggestions.

Thank you very much,

Jose




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/