[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: 回复: \[EnergyPlus_Support\] how to get the to tal cooling load\?



Well,if you want to get the load,you should add an ideal load system for each zone.
Each ideal load system must be referenced to a thermostat so you have to creat the same number of thermostat than different temperature schedules you wull have.if all the building has the same temperature schedule you should only create one thermostat.
After that you should create the output variable in the idf,you can read the avaliable variables in the rdd file after rum the simulation.you should read the input output document to know more about which variable could you ask to EnergyPlus.For this ideal system the variable are something similar to IDEALLOADSYSTEMCooling load,i dont remember very well,check the pdf.
If you are beginner there are two tutorials in the getting started pdf which could help you.
Greets,
Ignacio Gomis



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___