[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] AFN



Please comment or correct my interpretation of the AFN docs

I am modelling ventilation through an open window. Using AirflowNetwork3zVent.idf example. 

With the Simulation Control set to Multizone Without Distribution, and a VAV HVAC Template Operating, will the AFN calculate the airflow through the window, and leave the HVAC to calculate the required cooling/heating flows ?  

Or is the AFN interfering with the HVAC during system on time ? 

I am getting the temp to set points during occupied hours. 

Its hard to tell, because the example doesnt have a HVAC. 

My model seems to work, but I am getting Sizing: Coil load = zero errors I cant solve. 

Thanks

Tom



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/