[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Adiabatic surfaces & the thermal mass





You need to represent that surface as "adiabatic" in both zones.

At 07:48 AM 2/6/2012, Farhang wrote:
In case of two zones with no significant temperature differences (which in my case they are 2nd and 3rd floor of a building), if a common surface uses itself as the outside environment (to act as an adiabatic surface), does EnergyPlus take into account the mass of this surface for each zone? All of the mass? Half of the mass? Or not at all?


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___