Re: [EnergyPlus_Support] Convergence Error in .err file, but not in .eio file

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

> However, the error
> appears to be during the sizing period, which doesn't appear to show up
> in the .eio file.  
You should see a Warmup Convergence
line that has the 
SizingPeriod: COLORADO SPRINGS MUNI AP ANN CLG 1% CONDNS
DB=>MWB

If you are running the sizing period as well as the sizing calculations.

Typically, if convergence errors happen, the run won't meet the setpoint
correctly (depends, of course, on how far out of convergence it
was).

If your runperiod environments reached convergence, you are most likely
okay.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___