[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] 2 Pipe Fan Coil Unit for Cooling + Radiant floor for heating





For Linda,
 
This type of question was seldom asked before the VAV templates were introduced.
 
May be we should go back to version 2.0 or 3.0 to train  the beginers with simple systems, and let version 7 to be used by  those who wanted to design for comfort  and issue a LEED certification.  There are too many fields which have options which are difficult to select.
 
The current default cooling conditions for VAV may not be suitable for systems without reheat.  This could be the reason for so many warnings and large heating demand in Summer during simulation.
 
 
 
 Dr. Li  

 

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: energyplus.1984@xxxxxxxxx
Date: Thu, 9 Feb 2012 21:09:58 +0000
Subject: [EnergyPlus_Support] 2 Pipe Fan Coil Unit for Cooling + Radiant floor for heating

 
I am modeling a system with Cooling provided by 2 pipe fan coil unit and Heating by Radiant floor system.

Since Energy plus has only 4 pipe fan coil unit. I need help in modeling 2 pipe system with radinat heating.

Thanks,

j




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___