sorry i think my input is wrong do you have example file for : waterheater +ZoneHVAC:LowTemperatureradiant:Constantflow
if yes , would you please send me?
thanks
From: Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx> To: EnergyPlus_Support@xxxxxxxxxxxxxxx Sent: Wednesday, February 22, 2012 1:27 AM Subject: RE: [EnergyPlus_Support] warning
Dear Tooran,
Apparently you have defined pump power at a low value. Typical pump efficiency is less than 75-80%, so E+ is telling you that your pump is unrealistic.
The Building Performance Team James V. Dirkes II, P.E., BEMP , LEED AP 1631 Acacia Drive NW Grand Rapids, MI 49504 616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Tooran Sent: Tuesday, February 21, 2012 4:55 PM To: EnergyPlus_Support@xxxxxxxxxxxxxxx Subject: [EnergyPlus_Support] warning
dear members , when i use water heater with zonehvacbaseboard:water heater , i see this warning , could you please help me?
** Warning ** Check input. Calculated Pump Efficiency=96.00% is approaching 100%, for pump=HW CIRC PUMP