[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] no differences between results in PCM and reference



Put insulation, or nothing in place of brick is what I would do, as most buildings are "light weight" and would not have such brick.

I would say you are getting close.

Could you please describe in detail the goals of your project?

Thanks

On Mon, Mar 5, 2012 at 12:02 PM, Mohammad Kheradmand <mohammadkheradmand@xxxxxxxxx> wrote:
 

I tried, i got reasonable result between reference and PCM almost 3 -4 degree also i put brick again in partition and result was same as before i did(no difference), but the differences between experimental and simulation is too high (almost 10-15 degree), what can i do? 

From: CleanTech Analytics <jeremiah@xxxxxxxxxxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Monday, March 5, 2012 7:13 PM

Subject: Re: [EnergyPlus_Support] no differences between results in PCM and reference

 
Try this and let me know..

On Mon, Mar 5, 2012 at 11:02 AM, Mohammad Kheradmand <mohammadkheradmand@xxxxxxxxx> wrote:
 
I try to retrify experimental result, i cant move to outer wall, so it is necessary to be on outer layer of partition, my weather file refer to 2005 i don't  know, how can i convert to 2011 as a new one? also the thickness is fix .

thanks 

From: CleanTech Analytics <jeremiah@xxxxxxxxxxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Monday, March 5, 2012 6:28 PM
Subject: Re: [EnergyPlus_Support] no differences between results in PCM and reference

 
Try moving your PCM to an outer wall, or changing your weather file, or changing the thickness of your PCM.
Also make a spreadsheet that compares the two in terms of percent, as small savings in kWh for a single day may be bigger savings then it seems by just looking at kWh.

Let me know if you still have the issue after experiments..

On Mon, Mar 5, 2012 at 9:50 AM, Mohammad Kheradmand <mohammadkheradmand@xxxxxxxxx> wrote:
 
Could you please help me , what is wrong ? why i have, same results between two simulation?

regards



--
Jeremiah D. Crossett
CleanTech Analytics
This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics






--
Jeremiah D. Crossett
CleanTech Analytics
This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics






--
Jeremiah D. Crossett
CleanTech Analytics
503-688-8951
www.cleantechanalytics.com


This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___