[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] best construction for PCM



Your best application depends on the PCM, could you tell me more about your project?

Due to the fire hazard issues of other PCM's in the USA, the only commercially viable product in the USA is the BioPCM product, and so that is what I have the most experience with, so I have attached files on the best configuration for the BioPCM product. 

Also I have lots more data, (example files, experimental setups, DSC etc) on BioPCM I could send you if that would be helpful?



On Mon, Mar 5, 2012 at 1:48 PM, malzuu <malzuu@xxxxxxxx> wrote:
 

Hi,
actually i'm modeling a zone with PCM.
The PCM is enclosed in square section bars packages inside the room.
Which is the best way to simulate it
Actually i'm trying with an internalmass with surface equal to 1/4 all the bars surface (with PCM thickness as bar) can be correct?




--
Jeremiah D. Crossett
CleanTech Analytics
503-688-8951
www.cleantechanalytics.com


This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\bioPCMCeiling2.png

Attachment not found:
d:\eudora\attach\bioPCM-Wall2.png