[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] VRF and Outside air
- To: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Subject: [EnergyPlus_Support] VRF and Outside air
- From: "gustlongmor" <g.longaray@xxxxxxxxx>
- Date: Thu, 08 Mar 2012 15:37:22 -0000
- Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
- Delivery-date: Thu, 08 Mar 2012 08:37:26 -0700
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=lima; t=1331221045; bh=75AZsJkCozAswBFHqkpIixLpy8a1Wypyvyqr2ltl4+w=; h=Received:Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:User-Agent:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type:Content-Transfer-Encoding; b=Nh+By3l4D0oMIlR+OqaB4b6oHLIckPOPOrUiaYbEpxVI6ysvDbDwMnwOlVvqA2YtXSL6RiDGXXDZ2hDSx2vwvPUYEzcYOANSyqkSO7GmrkTqO7kZZxgQTRiVxePqBoQH
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=ljgJFf3KphEinnXqYWMYePA4VaHemQ0iT2bQ7YIBOjbDFmkMvS2P/IWqdH0Zk5m6AuL6G2oS8MsPJzG9EyIht3hRqHalujYWj504Un1J2ti/59v/x3PQXv61Waic8G/T;
- Envelope-to: linda@xxxxxxxxxxxxxx
- List-id: <EnergyPlus_Support.yahoogroups.com>
- List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
- Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
- Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
- User-agent: eGroups-EW/0.82
Hi All,
I'm simulating a VRF system for a building and I need to get separated demand results for fans, which are a terminal unit fan (one per zone), an exhaust fan (various zones per fan) and an Outdoor inlet air fan (various zones per fan).
At this moment, to get this results, I'm trying to create a separate VRF from the suply/exaust air system, making a Air loop into the zone. However to achive some correct results, I need to "close" the inlet air node in OutdoorAir:Mixer, or even taking off the mixer, but unfortunately, as far as I tried, e+ can't prescind a outdoor air node listed in OutdoorAir:Node, even without mixer.
Anybody knows if is it possible to make what trying or there is another way?
thank you
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/