[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] How does ZoneVentilation: Design Flow Rate operate





Hi,

I am modelling a zone in which I need ventilation in the form of a fan which brings in the OA and exhaust the same on balanced flow method. Now, when I use the object Zone Ventilation: Design Flow Rate, it only asks me the availability schedule and design flow rate calculation method and some specifications such as pressure, efficiency and temp. n velocity coefficients. My questions are:

1. Does this mean that it automatically operates on the principle of pushing the OA inside with a balanced flow condition maintained thru an exhaust fan.
2. Which output variable I must use to find out the amount of OA inlet in my zone and the fan energy consumption.
3. I have not specified the pressure, and coefficient as the data is unavailable, would this affect the functioning of this object?

I am attaching a screenshot of the object which I am using in my model.

Thanks,
SACHIN SHARMA



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\ZoneVentilation Design Flow Rate.jpg