Re: [EnergyPlus_Support] Re: open expansion tank

[Tooran T <t.t111ir@xxxxxxxxx>]

sorry what do you mean?

i modeld two loops that these loop have water heater ,

one for DHW and another for  hot water for radaitor .

but i need to simulate open expansion tank.

From: M�¡rio <mneves32@xxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Friday, May 11, 2012 3:20 PM
Subject: [EnergyPlus_Support] Re: open expansion tank

 

what is your objective?

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Tooran" <t.t111ir@...> wrote:
>
> Dear team
> I want to model a building that have an "open expansion tank". As you know, an "open expansion tank" is a storage tank at the roof of buildings that is at atmosphere pressure and is used to adjust the pressure of the central heating systems. It means when water became hot its volume increases, and this increased volume go to" the open expansion tank" to prevent from increase of the loop pressure and when water became cold and it's volume decreased, the water leave the "open expansion tank" to ncrease the pressure and prevent from the minus pressure.
> Could you please help me and say which object is good for simulation of "open expansion tank" as described above?
> Regards
>

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___