[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Modelling Opening Shopfronts



Hello,

I Have a simple idea on how to do this, and not unsing an special object:

1- Turn on HVAC when conditions for external tempreture are not right;
2- Use the air flow Infiltration, usaly with 6 ach in a zone it tempreture tends to be the same as the out side temp.

MN


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Ooi" <ooi_kb3@...> wrote:
>
> Besides Shading surfaces, i recall there is an infrared transparent material. Does this help?
> ooi
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "energy.partners" <energy.partners@> wrote:
> >
> > I would like to model a cafe/restaurant with open shopfront. The foldaway fenestrations is open when the outside temperature is, say, between 18°C to 28°C and wind speed is, say, less than 3m/s. And when the fenestration is open the HVAC in the three metre deep perimeter zone is turned off. I think this is a common mode of operation of cafes in Australia.
> > 
> > Could EnerpyPlus AirflowNetwork objects model the above shopfront? If not, any other objects in EnergyPlus can model this?
> > 
> > Thank you very much for the time.
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/