[EnergyPlus_Support] do I need a return outlet node for each zone?

[vincent lacour <vlacour@xxxxxxxxx>]

I am trying to use energy plus for a three-zone building where outside air is supplied to room 1 and 2 to through a heat exchanger and a splitter and returned through an outlet node from room 3. Â The air flow uses doors between room 1 and room 3, and between room 2 and room 3 to reach the return path. Â

The issue is that if I consider each room as a separate zone, I take from E+ documentation that I need a return outlet node in each zone when I would prefer to stick to the actual flows from R1 to R3 and from R2 to R3.

What should I do?

thanks in advance.

Vincent

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___