Dear fellows,
I am simulating a room with natural ventilation that has one window ando ne door. This door is connected to the next zone, which is corridor. I am only interested in simulating the conditions in the room . I implemtend the objects related to the airflownetwork but I am getting the following severe error:
** Severe ** GetAirflowNetworkInput: AirflowNetwork:MultiZone:Surface = PORTA_SALA
** ~~~ ** ..Zone = SALA_AULA_1 is not described in AIRFLOWNETWORK:MULTIZONE:ZONE
** Warning ** GetAirflowNetworkInput: SurfaceAverageCalculation is entered for field = Wind Pressure Coefficient Type, but no roof surface is defined using an AirflowNetwork:MultiZone:Surface object.
** ~~~ ** Reconsider if this is your modeling intent. Simulation continues.
** Warning ** GetAirflowNetworkInput: SurfaceAverageCalculation is entered for field = Wind Pressure Coefficient Type.
** ~~~ ** The AirflowNetwork model provides wind pressure coefficients for 4 vertical exterior orientations and 1 horizontal roof.
** ~~~ ** There are only 1 exterior surface orientations defined in this input file using AirflowNetwork:MultiZone:Surface objects.
** ~~~ ** Reconsider if this is your modeling intent. Simulation continues.
** Fatal ** GetAirflowNetworkInput: Errors found getting inputs. Previous error(s) cause program termination.
...Summary of Errors that led to program termination:
..... Reference severe error count=1
..... Last severe error=GetAirflowNetworkInput: AirflowNetwork:MultiZone:Surface = PORTA_SALA
************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).
************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.
The object mentioned is set in my file like this:
Can you help me?
Thanks.
Alberto
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___