[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Ventilating from zone A into zone B depending on temperature
- To: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Subject: [EnergyPlus_Support] Ventilating from zone A into zone B depending on temperature
- From: "Jean marais" <jeannieboef@xxxxxxxxx>
- Date: Thu, 31 May 2012 09:04:37 -0000
- Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
- Delivery-date: Thu, 31 May 2012 03:04:39 -0600
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=lima; t=1338455078; bh=8R9AdS8vSR6s9q5Jw/x59qzsr2B1w7wrYvqzulIM/qg=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:User-Agent:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type:Content-Transfer-Encoding; b=uUNibHdMfJHYEmydzvr9WWEXoP0svSnnPGp0I2+aSpibccElrGPs26ziImLiHH7Hoiur/gaIrcePA3OPMEsMtOXywUofBU9DPwBigDWsyNskAFPYrRhyAKXY70gKSXyM
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=TlmevtNoMph+cOKkaWgge6afhI/0RedC0VtY0CdjZ5tG1anTGxURXnsVndsed8CruL1NDODV4SXo/BQOUee4fwUP/s4a2GVdccYrp+UZu4HMdBT6NeQ9JxpHtONaTvVv;
- Envelope-to: linda@xxxxxxxxxxxxxx
- List-id: <EnergyPlus_Support.yahoogroups.com>
- List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
- Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
- Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
- User-agent: eGroups-EW/0.82
For some reason your msg is not retrievable on the yahoo site.
For this scenario you need a work around. The simplest is to use a ZoneMixing object (io ref pg. 507). You can define a deltaT at which mixing should happen, as well as the flow rate. A fan connecting two zones should have very little energy usage (depends on Volume Flow and Pressure) as the pressure should be minimal.
If you later want to record "fan energy" you will have to implement an EMS program, but I would think this is unnessary as the energy will be very little for fan power.
----------------------------------
The second work around is possibly to define the exhaust zone with an additional AirLoopHVAC:ReturnPlenum object (io ref pg 1357), that is, the exhaust zone is treated as the return plenum in the AirLoop for the supply zone.
******
The remaining question for both these methodes is: where does the supply air come from? The flows in must balance the flows out.
-----------------------------------------------
email from energy.partners@xxxxxxxxx
Hi,
Is it possible to set the Fan on/off of a zone which depends on the temperature of another zone?
I would like to set up a fan in room A which draw air from room B only when room B has a higher room temperature. Do anyone know how to setup the setpoint manager to set up the above situation?
Many thanks.
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/