[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: HeatExchanger:Plate or WaterHeater:Mixed

I also want to know. I've been using waterheater:mixed. not tried fluids other than water. 

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Miroslav Bratanov <miroslav_bratanov@...> wrote:
>
> Hello Everyone,
> 
> I have a CAV System whose heating coil uses ethylene glycol as a heat 
> transfer fluid. It is heated by means of plate heat exchanger connected 
> to water heating boiler.
> I want to know if it is possible to model the heat exchanger using 
> HeatExchanger:Plate object (please see the attached scheme), or I must 
> use WaterHeater:Mixed instead? The reason that I ask is because the I/O 
> Reference says that HeatExchanger:Plate object "is intended to couple 
> two condenser loops" and I just want to confirm that with you.
> 
> Thank you very much!
> Miroslav
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/