Hello group,
I was looking for the U-value for my constructions, I think I found them in the eio file,the next lines are the headers where I found them:
! <HeatTransfer/Shading/Frame/Divider_Surface>,Surface Name,Surface Class,Base Surface,Construction/Transmittance Schedule,Nominal U (w/o film coefs)/Min Schedule Value,Nominal U (with film coefs)/Max Schedule Value,Solar Diffusing,Area (Net),Area (Gross),Area (Sunlit Calc),Azimuth,Tilt,~Width,~Height,Reveal,<ExtBoundCondition>,<ExtConvCoeffCalc>,<IntConvCoeffCalc>,<SunExposure>,<WindExposure>,ViewFactorToGround,ViewFactorToSky,ViewFactorToGround-IR,ViewFactorToSky-IR,#Sides
! <Units>,,,,,{W/m2-K}/{},{W/m2-K}/{},{},{m2},{m2},{m2},{deg},{deg},{m},{m},{m},,,,,,,,,,
So I understood that the U-values are the "Nominal U (w/o film coefs)" and "Nominal U (with film coefs)". The problem is that I dont understand very well the difference between with and without film coefs (probably I have a gap in my mind about heat transfer). Which is used to solve the heat transfer equations? Could someone help me?
Ignacio Gomis
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___
- Follow-Ups:
- Re: [EnergyPlus_Support] U-values for constructions
- From: Nacho Gomis
- References:
- [EnergyPlus_Support] U-values for constructions
- From: Ignacio
- Prev by Date: [EnergyPlus_Support] airflowcontrol
- Next by Date: [EnergyPlus_Support] report difference
- Previous by thread: [EnergyPlus_Support] U-values for constructions
- Next by thread: Re: [EnergyPlus_Support] U-values for constructions
- Index(es):