The error you have described is not an error. Is is a common characteristics for all graphic tools displaying a single point of data. Excel may display some dots and becomes almost invisible. xESOviewer may do the same, remember that the x-axis is on a one year length. If you scroll the graph to that time, you may see it.
When you have a report variable which covers two separated time periods, the xESOviewer uses a common annual time axis and may display them far apart. For example, the two periods of the Summer and Winter days would be far apart.
You cannot run EPlus simulation with larger than one hour interval (timestep less than 1), therefore I do not see the problem.
You cannot run a daily simulation. You may report the value as a daily averaged value. This is the reason why the DesignDay simulation would not produce weekly, monthly or yearly report summaries.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: nachogo27@xxxxxxxxx
Date: Wed, 18 Jul 2012 18:36:55 +0200
Subject: [EnergyPlus_Support] xEsoView error (frequent)
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
When you have a report variable which covers two separated time periods, the xESOviewer uses a common annual time axis and may display them far apart. For example, the two periods of the Summer and Winter days would be far apart.
You cannot run EPlus simulation with larger than one hour interval (timestep less than 1), therefore I do not see the problem.
You cannot run a daily simulation. You may report the value as a daily averaged value. This is the reason why the DesignDay simulation would not produce weekly, monthly or yearly report summaries.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: nachogo27@xxxxxxxxx
Date: Wed, 18 Jul 2012 18:36:55 +0200
Subject: [EnergyPlus_Support] xEsoView error (frequent)
Hello group,
this time I'm not going to ask any dude. I only want to advice one problem that I found today with xEsoView. I'm not used to using it for processing my simulations but a colleague was having problems with, he ran the simulation with only two output variables reported daily. When he tried to see them with xEsoView there is only one value in the graphic. I checked the csv file and all was OK. I've tried with other frequents and I noticed that the xEsoView must process at least one hourly(or lower frequent) variable to show the graphics.
-Running a simulation only with daily(or bigger frequent) variables, xEsoView can not process the graphics.
-Running a simulation with at least an hourly variable, xEsoView works fine.
I hope this can help others in the future.
Ignacio Gomis
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___