I did not look at the IDF in detail. The simmulation with the DesignDay objects added was error free.
The summary report showed the floor area as 72 m2. The heating and cooling rates were around 1.5 kw for the Winter and SUmmer design days.. These capacity can be met with a portable unit.
You were using annual simulation, and the result simply means that you may not need HVAC system.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
CC: kontante@xxxxxxxxxxx
From: ordoumpozanis@xxxxxxxxx
Date: Sun, 29 Jul 2012 09:16:04 -0700
Subject: [EnergyPlus_Support] Problem with low heting values from e+
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
The summary report showed the floor area as 72 m2. The heating and cooling rates were around 1.5 kw for the Winter and SUmmer design days.. These capacity can be met with a portable unit.
You were using annual simulation, and the result simply means that you may not need HVAC system.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
CC: kontante@xxxxxxxxxxx
From: ordoumpozanis@xxxxxxxxx
Date: Sun, 29 Jul 2012 09:16:04 -0700
Subject: [EnergyPlus_Support] Problem with low heting values from e+
Dear E+ users
I
am having problem to understand why e+ gives very low heating values to the
attached model.
It's a simple 2floor domestic house with an ideal system and
some classic internal load (people, lights, equipment) and an infiltration.
The results give a value of 0.07 kWh/m2 witch is not realistic. I have checked
the internal load, I have changed a climate files but still cannot get
realistic values.
The only thing that I can imagine is the thermal mass
but I have checked the material properties as well could you suggest any
other parameter that I might have not check, or if you had a similar problem to
propose me a solution
Thank you in regards
K.O.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___