[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Problem with low heting values from e+

1)Report your ODA rates and check that the minimum ODA rate is correct. 
2)Try FullExteriorAndInteriorWithReflections in your building model.

Q1) what is your window to wall ratio and what is the U-value of your glazing?

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, kostas ordoumpozanis <ordoumpozanis@...> wrote:
> Dear E+ users
>     I
> am having problem to understand why e+ gives very low heating values to the
> attached model. 
> It's a simple 2floor domestic house with an ideal system and
> some classic internal load (people, lights, equipment) and an infiltration. 
> The results give a value of 0.07 kWh/m2 witch is not realistic. I have checked
> the internal load, I have changed a climate files but still cannot get
> realistic values. 
> The only thing that I can imagine is the thermal mass
> but I have checked the material properties as well could you suggest any
> other parameter that I might have not check, or if you had a similar problem to
> propose me a solution
> Thank you in regards 
> K.O.


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: