[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Existing Building, LEED NC
Hello,
I am also geting an alert.
It is an intrusion alert and origem adress is 212.71.10.196.
Best Regards
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, YuanLu Li <yli006@...> wrote:
>
>
> This reply is not the for the mail addressed. I am curious if any other user is getting a similar virus block message on their PC. I am using AVG free on my PC Windows Vista. I have seen the same message five or six times during the last few days. Does anyone recognize the website. Dr. Li
> To: bldg-sim@...; EnergyPlus_Support@xxxxxxxxxxxxxxx; equest-users@...
> From: jeremiah@...
> Date: Thu, 2 Aug 2012 12:15:33 -0700
> Subject: [EnergyPlus_Support] Existing Building, LEED NC
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Good day to all..
> Working on modeling an existing building per 90.1 for LEED certification and can not find clear answers in the standard or users guide- and seeking of the advise of the Bidg-Sim community-
>
> The building is basically a shell- the 6 inch tilt up concrete walls and concrete floor are the only things remaining un-changed. The building is installing new HVAC systems, a new roof, a new lighting systems, new skylights, new doors, new windows and insulating the existing walls. The space is 35,000 square feet, and beside another building. The building owners bought out their former neighbor and are expanding into their space, the space shares a wall with their current space.
>
>
>
> Adiabatic wall- Should it be Modeled with an adiabatic wall separating the "two" buildings (that are actually one building with a separating wall and separate address), or should the "other building" not seeking LEED certification be included in the model?
>
>
> Rotated average baseline- This is an existing building and orientation is set, so is this procedure still necessary or required by 90.1/LEEDBaseline Constructions- Should the baseline reflect the walls as they where before renovation (Un insulated tilt up concrete walls/R-5 roof deck?) or should it use the ASHRAE light weight constructions with 2007 insulation for the climate, or should it use the actual constructions but add ASHRAE 2007 insulation?
>
>
> The HVAC system is a CAV, with convective natural gas heating and and DX cooling- roof top units, the baseline system for this should be system # 5 PVAV- or should the baseline HVAC system be what ever system was in the building before the renovation?
>
>
>
> An advanced thank you goes out to all that respond-
>
>
>
> Jeremiah D. CrossettCleanTech Analytics
>
>
> 503-688-8951www.cleantechanalytics.com
>
>
>
>
>
>
>
> This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/