Dear Fong Haibo, There is no short method to prepare an EnergyPlus model. It requires a lot of study and practice! Also, modeling vegetation on the side of the building is not a standard practice. It may be possible, but will require expert knowledge. You might investigate SketchUp with OpenStudio or Designbuilder, which are GUIs for EnergyPlus. They will make some tasks easier, but the overall task is still very difficult. From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of fong haibo Hello Everybody, I want to make an energy simulation for the typical official building types. By using green vegetation system on different side of building façade, I want to achieve the most energy (cooling and heating ) saving option for the specific building. I try to use E+ to do the work, because I know that the E+ has the option of using green roof as insulation. However, the E+ has so many parameters and really complicated. I just need the standard options for most of them, and focus on a few parameters (like different façade types with different heights and ages). So, could you please tell me how to do it with E+, or any other building energy simulation program that are suitable for my case? I really appreciate it. Best Regards __._,_.___ Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe __,_._,___ |