[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] output variable giving only outside surface temperature and inside surface temp

Dear collegues

I am a new user of energy plus. My apologies if my question was asked before.

My first question is: I am getting inside and outside surface temperatures as output variables only. Instead I want zone air temperatures etc.

My second question: How can I specify infiltration for each zone. I am modelling a small house which does not have any air conditioning or mechanical fan.

Third question: I want to set comfort temperature limits for both summer and winter and the calculate the ideal heating and cooling loads that will maintain these temperatures. I also want the calculation for heating and cooling loads to skip those times in which the house is able to regulate itself passively.

Sorry for long questions.

I hope to hear from you guys soon.




Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: