[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Re: Strange error = window vertices - but why?





The coordinates listed do not make a surface.  X and y are all the same and only z changes so you describe a line that will not pass the geometry test.

 

Ned Lyon, P.E. (MA)
Staff Consultant

SIMPSON GUMPERTZ & HEGER
781.907.9000 main
781.907.9350 direct 
781.907.9009 fax
www.sgh.com

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Jeremiah Crossett
Sent: Thursday, August 30, 2012 6:14 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: Strange error = window vertices - but why?

 

 

I found the issue, I pasted a window in place from a DB file, and it was rejected- BUT I can not understand why? the vertices's look like they are in the right place-and I want the change the window like I have many times before... Any advise?

 

 

Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions

120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951

www.phasechange.com 

 

 

  

 

 

 



On Thu, Aug 30, 2012 at 3:06 PM, Jeremiah Crossett <jcrossett@xxxxxxxxxxxxxxx> wrote:

Anyone have ideas for this one> it was working fine and I changed an airflow setting then this> when I change back it does not go away...?

 

Program Version,EnergyPlus-64-MP 7.1.0.012, 8/30/2012 3:03 PM,IDD_Version 7.1.0.012

   ************* Beginning Zone Sizing Calculations

   ** Severe  ** CalcCoordinateTransformation: Invalid dot product, surface="FIN Left":

   **   ~~~   **  (  -3.745,  -3.638,   1.981)

   **   ~~~   **  (  -3.745,  -3.638,   0.975)

   **   ~~~   **  (  -3.745,  -3.638,   0.975)

   **   ~~~   **  (  -3.745,  -3.638,   1.981)

   **  Fatal  ** CalcCoordinateTransformation: Program terminates due to preceding condition.

   ...Summary of Errors that led to program termination:

   ..... Reference severe error count=1

   ..... Last severe error=CalcCoordinateTransformation: Invalid dot product, surface="FIN Left":

   ************* Warning:  Node connection errors not checked - most system input has not been read (see previous warning).

   ************* Fatal error -- final processing.  Program exited before simulations began.  See previous error messages.

   ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.

   ************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 1 Severe Errors.

   ************* EnergyPlus Terminated--Fatal Error Detected. 0 Warning; 1 Severe Errors; Elapsed Time=00hr 00min  0.86sec

 

 

Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions

120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951

www.phasechange.com 

 

 

  

 

 

 

 

 



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___