[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

=?gb18030?b?u9i4tKO6ILvYuLSjuiBbRW5lcmd5UGx1c19TdXBw?==?gb18030?b?b3J0XSBIb3cgdG8gZ2V0IHRoZSBidWlsZGluZyBh?==?gb18030?b?bm51YWwgbG9hZHMgPw==?=



Hello:
     What's is .rvi or .mvi or .mve file ? I can not find in E+ install Folder.
     Thank you very much.


------------------ Ô­Ê¼Óʼþ ------------------
·¢¼þÈË: "Jeremiah Crossett"<jcrossett@xxxxxxxxxxxxxxx>;
·¢ËÍʱ¼ä: 2012Äê8ÔÂ31ÈÕ(ÐÇÆÚÎå) ÉÏÎç9:47
ÊÕ¼þÈË: "EnergyPlus_Support"<EnergyPlus_Support@xxxxxxxxxxxxxxx>;
Ö÷Ìâ: Re: »Ø¸´£º [EnergyPlus_Support] How to get the building annual loads ?

 

You can get more detailed output variables by choosing


Output diagnostics
Key 1 DisplayAdvancedReportVariables

  • Then you can get surface energy transfer, surface energy storage, surface temperatures etc..

If you are building an interface > (wow very cool please tell me more/keep me posted!)> you might want to use .rvi or .mvi files, you could then for instance setup your interface to run with all the variables you find of interest then use .rvi or .mve to extract the .csv files from the .eio file created when running e+..


 


Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951
 

 






On Thu, Aug 30, 2012 at 6:38 PM, ·ðÎÞÊâ°® <fowushuai@xxxxxx> wrote:
 

Hello
     Yes, I can get the "Zone total Internal Total Heat Gain" by output variable.But I want to get all loads.such as wall ,door, window. I can not find these outputs. I want to calc sum annual loads about
the building!
     Thank you very much!


------------------ ԭʼÓʼþ ------------------
·¢¼þÈË: "Jeremiah Crossett"<jcrossett@xxxxxxxxxxxxxxx>;
·¢ËÍʱ¼ä: 2012Äê8ÔÂ31ÈÕ(ÐÇÆÚÎå) ÉÏÎç9:25
ÊÕ¼þÈË: "EnergyPlus_Support"<EnergyPlus_Support@xxxxxxxxxxxxxxx>;
Ö÷Ìâ: Re: [EnergyPlus_Support] How to get the building annual loads ?

 

I usually get loads from HTML output HVAC sizing summery- but I think you should be able to get it from a variable as well.



Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951
 

 






On Thu, Aug 30, 2012 at 5:54 PM, ·ðÎÞÊâ°® <fowushuai@xxxxxx> wrote:
 

Hello:
    We are developping the interface about EnergyPlus. I have a question, How I can get the building annual loads?
    I'm very sorry! My english is Very poor.
    Thank you very much!
 
                                                                                                                       ¸¶Ë§
                                                                                                                       2012-08-31





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___