[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] =?gb18030?b?u9i4tKO6UkU6ILvYuLSjuiC72Li0o7ogu9i4tKO6?==?gb18030?b?IFtFbmUgcmd5UGx1c19TdSBwcG9ydF0gSG93ICB0?==?gb18030?b?byBnZXQgdGhlIGJ1aWxkaW5nICBhbm51YWwgbG9h?==?gb18030?b?ZHMgPw==?=





 
Ç×°®µÄÀî:
     º°ÁË´ó°ëÌ죬ÖÕÓÚÀ´Á˸ö˵Öйú»°µÄ¡£¿´Ñù×ÓÔÛÃÇÕæÊÇÓÐÔµ·Ö°¡¡£¹úÄÚʹÓÃE+µÄÈËÔ½À´Ô½¶àÁË£¬¹ú¼ÒÒ²¿ªÊ¼ÖØÊÓ»·±£½ÚÄܵĽ¨Öþ¡£ËùÒÔÎÒÃǹ«Ë¾¾Í¿ª·¢ÁËE+µÄ½Ó¿Ú¡£¶øÏÖÔÚÎÒÒª¸ºÔðµÄÊÇ£¬Í³¼ÆE+Öн¨ÖþÎïµÄÈ«Ä긺ºÉ¡£ÔÚE+ InputAndOutputReference.pdfÎĵµÖÐÕÒ²»µ½ÀàËƵÄÊä³öÏî¡£²ÅÌá³öÕâЩÎÊÌâµÄ¡£Ä¿Ç°ÎÒÄÜÕÒµ½µÄ¾ÍÊÇ
    zone
    1. Zone Total Internal Total Heat Gain
    surface
    1. Surface Outside Face Solar Radiation Heat Gain Energy
    2. Surface Outside Face Net Thermal Radiation Heat Gain Energy
    3. Surface Outside Face Convection Heat Gain Energy
    4. Surface Inside Face System Radiation Heat Gain Energy
    5. Surface Inside Face Internal Gains Radiation Heat Gain Energy
    6. Surface Inside Face Lights Radiation Heat Gain Energy
    7. Surface Inside Face Solar Radiation Heat Gain Energy
    8. Surface Inside Face Net Surface Thermal Radiation Heat Gain Energy
    9. Surface Inside Face Convection Heat Gain Energy
    window
    1. Zone Transmitted Solar Energy
    2. Zone Window Heat Gain Energy
    3. Zone Window Heat Loss Energy
    4. Zone Beam Solar from Exterior Windows Energy
    5. Zone Diff Solar from Exterior Windows Energy
    6. Window Solar Absorbed:All Glass Layers Energy
    7. Window Transmitted Solar Energy
    8. Window Transmitted Beam Solar Energy
    9. Window Transmitted Beam-to-Beam Solar Energy
    10. Window Transmitted Beam-to-Diffuse Solar Energy
    11. Window Transmitted Diffuse Solar Energy
    12. Window Gap Convective Heat Flow Energy
    13. Window Heat Gain Energy
    14. Window Heat Loss Energy
    ÃźÍÎݶ¥µÄµ½Ã»ÓÐÕÒµ½¡£
    µ«ÊǶÔÓÚÕâЩ±äÁ¿Ö®¼äµÄ¹Øϵ»¹²»ÊǺÜÇå³þ¡£µ«¸Ð¾õ¿Ï¶¨ÊÇÓеġ£ÏÂÒ»ÖÜ£¬ÎÒÖ÷Òª¾ÍÊÇͨ¹ýʵÀýÑéÖ¤ÕâЩ±äÁ¿Ö®¼äµÄ¹Øϵ¡£
    ÏÖÔÚÁîÎÒ¿àÄÕµÄÊÇ£¬ÎÒÔÚidfÖÐËæ±ã¼ÓÒ»¸ö´°¿Ú£¬Ä£ÄâµÄʱºò¾Í»á±¨´í¡£¶ÔÓÚÐÞ¸ÄidfÎļþ½á¹¹µÄÄÚ²¿¹Øϵ»¹²»ÊǺÜÇå³þ¡£
    ÄúÒªÊÇÄÜÌṩЩ°ïÖú¡£²»Ê¤¸Ð¼¤¡£
    ×££º
    ¹¤×÷˳Àû£¬ºÏ¼Ò»¶ÀÖ¡£
 
 
                                                                                                      ¸¶Ë§
                                                                                                      2012.09.01

------------------ Ô­Ê¼Óʼþ ------------------
·¢¼þÈË: "YuanLu Li"<yli006@xxxxxxxxxxx>;
·¢ËÍʱ¼ä: 2012Äê9ÔÂ1ÈÕ(ÐÇÆÚÁù) Á賿2:22
ÊÕ¼þÈË: "EnergyPlus_Support"<energyplus_support@xxxxxxxxxxxxxxx>;
Ö÷Ìâ: RE: »Ø¸´£º »Ø¸´£º »Ø¸´£º [Ene rgyPlus_Su pport] How to get the building annual loads ?

 

Hi, Fu Se
 
Your  1.rvi (modified for file locations.)
 
Shanghai_V71DD.eso
Window1.csv
Zone Window Heat Gain
Zone Window Heat Loss
Zone Window Heat Gain Energy
Zone Window Heat Loss Energy
Window Heat Loss
Window Heat Gain
Window Transmitted Solar
EnergyTransfer:Facility
0
 
produced  following in the audit file. ==========
 
ReadVarsESO
processing:in.rvi
input file:Shanghai_V71DD.eso
output file:Window1.csv
found/finding:
3 Zone Window Heat Gain
3 Zone Window Heat Loss
3 Zone Window Heat Gain Energy
3 Zone Window Heat Loss Energy
1 Window Heat Loss
1 Window Heat Gain
1 Window Transmitted Solar
0 EnergyTransfer:Facility

ReadVars Run Time=00hr 00min 0.11sec
ReadVarsESO program completed successfully.
=========
 
The last variable was not found.
 
3 Zone windows were listed,  The single window result seems to be repeated.
 
Did you get the same rresult?



 Dr. Li  

 

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: fowushuai@xxxxxx
Date: Fri, 31 Aug 2012 11:19:24 +0800
Subject: »Ø¸´£º »Ø¸´£º »Ø¸´£º [EnergyPlus_Support] How to get the building annual loads ?

 
Hello:
     Our software is designed on AutoCAD.
     1. Draw an build(in autocad).
     2. select an hvac(in autocad).
     3. we can create an .idf file depend on step1 and step2.
     4. running idf, the .eso file is auto created.
     5. we parse some item from .eso file by the customer needed!
     Thank you very much

------------------ ԭʼÓʼþ ------------------
·¢¼þÈË: "Jeremiah Crossett"<jcrossett@xxxxxxxxxxxxxxx>;
·¢ËÍʱ¼ä: 2012Äê8ÔÂ31ÈÕ(ÐÇÆÚÎå) ÉÏÎç10:44
ÊÕ¼þÈË: "EnergyPlus_Support"<EnergyPlus_Support@xxxxxxxxxxxxxxx>;
Ö÷Ìâ: Re: »Ø¸´£º »Ø¸´£º [EnergyPlus_Support] How to get the building annual loads ?

Please tell me more about your interface?

You should first set your IDF to
Output variable dictionary to
Key Field IDF
Sort Option Name

Then you will get a set of output options in dropdown format in the variables and meter output options.

Then the .rvi can be created with simple syntex- open text editor (I like notepad++) create file similar to> (this example I use for je+, and have changed the words "eplusout" for the words YourFileName" ) you put your output variables below the name of the .eso file (model results) and .csv (the file you want to generate) Also using the utility "post processor command" can generate .rvi (report varrible index)

 

YourFileName.eso
YourFileName.csv
Heating:DistrictHeating
Cooling:DistrictCooling
EnergyTransfer:Facility
0

Please send me your file and I will make you an example- Also they are refrenced in documentation

Tips & tricks page 35-










Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951
 

 






On Thu, Aug 30, 2012 at 7:22 PM, ·ðÎÞÊâ°® <fowushuai@xxxxxx> wrote:
 


Hello:
     What's is .rvi or .mvi or .mve file ? I can not find in E+ install Folder.
     Thank you very much.


------------------ ԭʼÓʼþ ------------------
·¢¼þÈË: "Jeremiah Crossett"<jcrossett@xxxxxxxxxxxxxxx>;
·¢ËÍʱ¼ä: 2012Äê8ÔÂ31ÈÕ(ÐÇÆÚÎå) ÉÏÎç9:47
ÊÕ¼þÈË: "EnergyPlus_Support"<EnergyPlus_Support@xxxxxxxxxxxxxxx>;
Ö÷Ìâ: Re: »Ø¸´£º [EnergyPlus_Support] How to get the building annual loads ?

 
You can get more detailed output variables by choosing

Output diagnostics
Key 1 DisplayAdvancedReportVariables

  • Then you can get surface energy transfer, surface energy storage, surface temperatures etc..

If you are building an interface > (wow very cool please tell me more/keep me posted!)> you might want to use .rvi or .mvi files, you could then for instance setup your interface to run with all the variables you find of interest then use .rvi or .mve to extract the .csv files from the .eio file created when running e+..


 


Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951
 

 






On Thu, Aug 30, 2012 at 6:38 PM, ·ðÎÞÊâ°® <fowushuai@xxxxxx> wrote:
 

Hello
     Yes, I can get the "Zone total Internal Total Heat Gain" by output variable.But I want to get all loads.such as wall ,door, window. I can not find these outputs. I want to calc sum annual loads about
the building!
     Thank you very much!


------------------ ԭʼÓʼþ ------------------
·¢¼þÈË: "Jeremiah Crossett"<jcrossett@xxxxxxxxxxxxxxx>;
·¢ËÍʱ¼ä: 2012Äê8ÔÂ31ÈÕ(ÐÇÆÚÎå) ÉÏÎç9:25
ÊÕ¼þÈË: "EnergyPlus_Support"<EnergyPlus_Support@xxxxxxxxxxxxxxx>;
Ö÷Ìâ: Re: [EnergyPlus_Support] How to get the building annual loads ?

 
I usually get loads from HTML output HVAC sizing summery- but I think you should be able to get it from a variable as well.



Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951
 

 






On Thu, Aug 30, 2012 at 5:54 PM, ·ðÎÞÊâ°® <fowushuai@xxxxxx> wrote:
 

Hello:
    We are developping the interface about EnergyPlus. I have a question, How I can get the building annual loads?
    I'm very sorry! My english is Very poor.
    Thank you very much!
 
                                                                                                                       ¸¶Ë§
                                                                                                                       2012-08-31













__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Embedded Content: 6043B0A7@xxxxxxxxxxxxxxxxxxxxx: 00000001,3698117e,00000000,00000000 Embedded Content: 5F4CCEA0@xxxxxxxxxxxxxxxxxxxxx: 00000001,6fca082c,00000000,00000000 Embedded Content: 5F4ACEA0@xxxxxxxxxxxxxxxxxxxxx: 00000001,7314c0c5,00000000,00000000 Embedded Content: 5F4BCEA0@xxxxxxxxxxxxxxxxxxxxx: 00000001,316f6482,00000000,00000000 Embedded Content: 5F49CEA0@xxxxxxxxxxxxxxxxxxxxx: 00000001,003fa33c,00000000,00000000 Embedded Content: 5F4ECEA0@xxxxxxxxxxxxxxxxxxxxx: 00000001,6c7f4f93,00000000,00000000 Embedded Content: 5F4DCED0@xxxxxxxxxxxxxxxxxxxxx: 00000001,503f119f,00000000,00000000