Thanks for your reply.
Yes, I have found this object.
Yet, it seems work with a serious of components (such as heating coil, humidifier, in/out nodem ... etc.) which I am not very familiar with.
And I have tried the example files which related to RH control.
It seems include alot .... and not easy to understand by myself.
Well, if I just want a zone with temp=25oC and RH=55% for all hours within a year. Which kinds of components do I need to concern with ? Just very simple setup and any types of AC system is ok for me ~~ Many thanks.
Toby Cheung> On 13 September 2012 13:30, tobycheung00 <tobycheung00@...> wrote:
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Vaibhav Jain <vaibhav.energyarchitect@...> wrote:
>
> Have you checked, ZoneControl:Humidistat object? You will understand its
> functioning from IO reference.
>
> Vaibhav Jain
> www.vaibhavjain.co
>
>
>
>
>
> > **
> >
> >
> > Dear All,
> >
> > Can anyone please suggest me the simplest (use minimum connected
> > equipment) way to control the relative humidity in a zone ?
> >
> > My condition is easy. I want to control the temperature and the relative
> > humidity in a zone, and finally want to find out the hourly ventilation
> > load of increasing number of occupant(1~8) within a year, according to
> > hourly outdoor conditions change.
> >
> > Its easy to control the zone temperature and yield the ideal zone load.
> > Yet adding humidity control seems a lot more complicated...
> >
> > Could you please suggest which components must be added in order to
> > facilitate the Humidity control. Many thanks.
> >
> > Toby Cheung
> >
> >
> >
>
__._,_.___