[EnergyPlus_Support] Ventilated ST and PV panels

["FrancescoP" <direzionecontraria@xxxxxxxx>]

On the roof of the building that I'm modeling there are solar thermal and photovoltaic panels. They are installed in the same way, from the top towards the bottom: PV panel or ST panel, wood panel, ventilated air cavity, insulation, internal plaster. 
I read that for PV panels there is the possibility to use SurfaceProperty:ExteriorNaturalVentedCavity and to impose the Field "Heat Transfer Integration Mode" of the object Generator:Photovoltaic equal to IntegratedSurfaceOutsideFace, but how could I model the presence of the wood panel between the PV panel and the ventilated air cavity? And what about ST panels?
With Regards
Francesco Passerini



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/