Excelent! thanks for this information Jeremiah!
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: jcrossett@xxxxxxxxxxxxxxx
Date: Wed, 17 Oct 2012 00:01:53 -0700
Subject: Re: [EnergyPlus_Support] Energy Plus for urban energy plannig
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: jcrossett@xxxxxxxxxxxxxxx
Date: Wed, 17 Oct 2012 00:01:53 -0700
Subject: Re: [EnergyPlus_Support] Energy Plus for urban energy plannig
Possibly I am incorrect, but I recently used a SRI calc to create high SRI materials that should reduce heat island effect, such as the one pasted below;
![]()
Name Cool-Roof_SRI-81
Roughness Smooth
Thermal Resistance 0.001
Thermal Absorptance 0.3
Solar Absorptance 0.3
Visible Absorptance 0.3
Then you could also do conceptual massing model green roofs, solar PV, shading from other buildings and much more,
I think E+ could be great for this so long as the modeler minimized the details of the models to high level parameters. Autodesk ecotech or vassarri may do a good job at this "conceptual massing" by making simplified models, so you might want to use a similar approach.
Jeremiah D. Crossett | Senior Analyst | Phase Change Energy Solutions
120 E. Pritchard St. | Asheboro, NC 27203 | Mobile 503-688-8951
On Tue, Oct 16, 2012 at 11:45 PM, oscar hernandez <oscarhernandez_81@xxxxxxxxxxx> wrote:
Hello Alessandro,
Very good question. I've been thinking on. I don"t know maybe the answer its "to try". There are many parameters that e+ doesn't take in count (heat island, wind corridors,etc) but maybe to study the solar influence from others buildings, e+ could be a solution. I don"t know what do you want to do?
Oscar.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: alexmac_00@xxxxxxxx
Date: Tue, 16 Oct 2012 13:06:06 +0000
Subject: [EnergyPlus_Support] Energy Plus for urban energy plannig
Hello,
do you think Energy Plus could work for energy planning of a whole neighborhood? Would it be only a matter of computing power or there are other issues? Cheers,
Alessandro
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___