Hello,
you can add a ideal air system with thermostats, for heating. Or you can use a HVAC templates for a heating air system, you can défine an air temperature in order to heat your zone by the air. Look the energy plus exemple , HVAC templates.
Good luck.
Oscar.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: amalia1706@xxxxxxxx
Date: Wed, 17 Oct 2012 15:46:26 +0000
Subject: [EnergyPlus_Support] ZoneVentilation
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
you can add a ideal air system with thermostats, for heating. Or you can use a HVAC templates for a heating air system, you can défine an air temperature in order to heat your zone by the air. Look the energy plus exemple , HVAC templates.
Good luck.
Oscar.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: amalia1706@xxxxxxxx
Date: Wed, 17 Oct 2012 15:46:26 +0000
Subject: [EnergyPlus_Support] ZoneVentilation
Hello
I need to add to my model a ventilation at a specific temperature. I have added my Ventilation (3.12 Air changes per hour) in my model through the: "ZoneVentilation:DesignFlowRate", but I dont know how I can set the ventilation temperature, which should be at 22°C.
I also tryed it by creating an HVAC System:" Ideal Loads Air System" but in this case I cant control the air changes per hour.
Can you help me on this?
Thank you
I need to add to my model a ventilation at a specific temperature. I have added my Ventilation (3.12 Air changes per hour) in my model through the: "ZoneVentilation:DesignFlowRate", but I dont know how I can set the ventilation temperature, which should be at 22°C.
I also tryed it by creating an HVAC System:" Ideal Loads Air System" but in this case I cant control the air changes per hour.
Can you help me on this?
Thank you
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___