[EnergyPlus_Support] Two AHUs for a zone

["FrancescoP" <direzionecontraria@xxxxxxxx>]

I would like to model a zone as connected to two different AHUs, one AHU with heating coil and the other one with cooling coil (it isn't a real HVAC system; this model is for ANNEX G of ASHRAE 90.1-2007). Is it possible? How should I specify the ZoneHVAC:Equipmentconnections? Should I specify the two inlet nodes in the same nodelist? Should the "zone retuen air node name" be the same for the two systems?
Do you know if there is an example file with such a situation, please?
With Regards



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/