[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] HVAC modeling
Hi,
I am trying to modelize the HVAC system of my building.
There are several splits and systems on the ceiling (I don't know how to translate this...), which are connected to 2 units on the outside. I have the reference of all this equipment, but I only found commercial booklet, which shows the basic characteristics (power, air flow). How can I know these system technologies?
For modelize it, it seems I have 2 possibilities (indicated on the E+ documentation, section Group - HVAC Templates):
- direct expansion cooling, packaged and split system
- packaged variable air volume systems using direct-expansion cooling
Knowing that I want to control setpoints (heating and cooling) and air flow, which configuration is the most appropriate?
Thanks,
AG
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/