[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] ASHRAE 90.1 and BuildingGroundSurfaceTemperature





Dear All,

I have a rather rudimentary question. When using the "Energyplus - Example file generator" in compliance with the ASHRAE 90.1 2007 standard, the example files that are generated come with the climate specific monthly BuildingGroundsurface temperatures in the .idf file. 

For instance, when one requests for an example file for Fairbanks, Alaska, it comes with its own set of Building GroundSurface temperatures. So my question is, when Energyplus Example file generator creates the idf file for Fairbanks, Alaska (Climate zone 8) does it take into account that the unheated slab also has a layer of insulation with a R-value of 2.6 (In S-I units) for a 600 mm slab?   

Thank you all in advance.
Sincerely yours'
Niraj
 

--
Niraj Poudel, Architectural Engineer.
PhD student, PDBE Program.
Clemson University, Clemson, SC.




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___