[EnergyPlus_Support] Reheat Coil Control

["Ladan" <ladan_joon@xxxxxxxxx>]

Hi Everyone,

I have a question about controlling my electric reheat coil in AirTerminal:Constant Volume Air:Reheat. 

I have a single zone office space, with DX cooling coil and gas furnace. To control humidity in the zone in early occupied hours of a summer day, I have set up a humidistat with max humidity ratio setpoint manager. The setpoint node is located on my cooling coil outlet. 
 
When I look at my hourly results, I see that humidity is controlled in my zone, but the Reheat Coil electric consumption is zero; instead, the gas furnace is generating heat in those early occupied hours of summer days. 

So, my question is how I should make the reheat coil work rather than the furnace? 

Thank you very much for your help,

Ladan



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/