[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] proposed desing CS proyect

My proposed desing has a mechanical ventilation system, there are injector fan that will provide outdoor air to each zone. There are one injector per vertical duct. Furthermore, no coils have been designed, just there will be chillers and each tenant will install their coils. (Surely, There will be fancoils but it won't be in any lease agreement and it is not designed)
I think that I need to make a mix between the proposed and baseline (system 8), I will model the injector fans and I will include coils of cold water, in each zone I will install a parallel piu reheat like in the baseline, I don't know if it is right or not???, because in the baseline I have VAV systems, and one per floor, and in my proposed I am modeling CAVs (the injector fan are constants.)

I really appreciate your help and corrections.
Dante García


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: