I have the following error regarding a large door on a building wall. No matter how many times I try, I cannot get rid of it. I have ensured that the coordinates of the subsurface are indeed within the base surface. I have also checked and rechecked to ensure that the coordinates are in the right order (starting in the UpperLeftCorner and in a CounterClockwise direction as mandated by my GlobalGeometryRules settings).
** Warning ** Base surface does not surround subsurface (CHKSBS), Overlap Status=No-Overlap
** ~~~ ** The base surround errors occurred 1 times.
** ~~~ ** Surface "SURFACE 19" misses SubSurface "SUB SURFACE 3"
Anyone ever had this issue before?
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___