Re: [EnergyPlus_Support] severe error

Thank you very much, this was the mistake!But now I run the simulation and I have again one severe error which I am trying to find out what is..but again nothing: the error is:

GetSurfaceData: Construction INTERNAL WALLS of interzone surface BLOCK1:ZONE6_PARTITION_2_0_0 does not have the same number of layers as the construction INFRARED 14 FIRST of adjacent surface BLOCK1:ZONE14_PARTITION_4_0_10032

** ~~~ ** ...this problem for this pair will not be reported again.

I am in the constuction field to find out what I have to change but I don't know.I'm sending you again the file to chech if you can, and a plan of my building.

I am so sorry that I bother you, but it's an emergency..thank you again!!

Erietta!

From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Saturday, December 8, 2012 5:40 PM
Subject: Re: [EnergyPlus_Support] severe error

This is your schedule.

Schedule:Year,
    Zone control Type,       !- Name
    Fraction,                !- Schedule Type Limits Name
    Winter Control Type Week Sch, !- Schedule:Week Name 1
    1,                       !- Start Month 1
    1,                       !- Start Day 1
    3,                       !- End Month 1
    31,                      !- End Day 1
    Summer Control Type Week Sch, !- Schedule:Week Name 2
    4,                       !- Start Month 2
    1,                       !- Start Day 2
    9,                       !- End Month 2
    30,                      !- End Day 2
    Winter Control Type Week Sch, !- Schedule:Week Name 3
    10,                      !- Start Month 3
    1,                       !- Start Day 3
    12,                      !- End Month 3
    31;                      !- End Day 3

Change it to:
Schedule:Year,
    Zone control Type,       !- Name
    Control Type,                !- THIS IS THE CHANGED LINE
    Winter Control Type Week Sch, !- Schedule:Week Name 1
    1,                       !- Start Month 1
    1,                       !- Start Day 1
    3,                       !- End Month 1
    31,                      !- End Day 1
    Summer Control Type Week Sch, !- Schedule:Week Name 2
    4,                       !- Start Month 2
    1,                       !- Start Day 2
    9,                       !- End Month 2
    30,                      !- End Day 2
    Winter Control Type Week Sch, !- Schedule:Week Name 3
    10,                      !- Start Month 3
    1,                       !- Start Day 3
    12,                      !- End Month 3
    31;                      !- End Day 3

and the error will go away, I suspect.

It is not inhibiting the actual run.