Re: [EnergyPlus_Support] Re: warmest day in the year

[Dru Crawley <dbcrawley@xxxxxxxxx>]

In that case you want design conditions...   IF the location for the weather has design conditions in the ASHRAE Fundamentals Handbook, then you'll get a .DDY file with design conditions -- a design day conditions file when you run your EPW through the Weather Converter.  (It's also in all the EPW .zip files that you can download from the DOE web site.)

 

These are also in the EPW header lines and you'll see that information in the .STAT file as well.  The .DDY file has the design day data in .IDF format -- you can just cut/paste from the .DDY into your project.  (You can open them in the IDF Editor as well.)

 

On Fri, Dec 14, 2012 at 12:52 PM, mohammad Rp <mohammad_sharvabalaaa@xxxxxxxxx> wrote:

 

what is mean that you say dont use it as equipment sizing data?

i need the warmest day in the year to simulate my mechanical system for this day only.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___