[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Problem in Cooling Load Energy



Helia, 
Sounds like solar loads to me. Hey so I noticed that four of your surfaces where titled to be adiabatic but where actually set to be externally adjacent, that your file was in E+  5, that you had no building object and that you where running at 12 timesteps. Also I noticed you mention PCM in the file name. I went ahead and updated your file and fixed some issues and have attached it to this email. Possibly your summer cooling loads will make more since with this updated version. 


Jeremiah D. Crossett  | Senior Analyst  |  Phase Change Energy Solutions
120 E. Pritchard St.  | Asheboro, NC 27203  | Mobile 503-688-8951
  





On Sun, Dec 23, 2012 at 6:23 AM, Helia Taheri <helia_taheri2003@xxxxxxxxx> wrote:
 

Hi 

I have problem in cooling load!!!!
The results are very non logical. For example in all of the days of July, we have a lot increase in cooling load between 8am to 8pm. Although I don't have any people and light schedule.
Thanks alot.

Best Regards,
Helia Taheri




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\13910930 Win 2x1 EP7 Without PCM DIVA new.idf