[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] initializing outdoor environment for surfaces





You may want to move to 7.2 version (Design Builder later version already supports that).  But I still have no idea why that code would slow down.

At 08:56 AM 1/10/2013, dante andres garcía meneses wrote:


I am using 7.1 version. I have translate an idf file from 7.0 version that was generated using design builder. i always do that and i never got problems.
Windows 7 home premium
 
Thank you
 
Dante


 
2013/1/10 Linda Lawrie <linda@xxxxxxxxxxxxxx>
 

What version are you running?  What platform?

There is not that much calculation that takes place between
Initializing Outdoor environment for Surfaces
and
Initializing Temperature and Flux Histories -- the next message

mostly array allocations -- so unless you are beating up against virtual memory paging, it shouldn't take that long.

Perhaps you should consult the helpdesk.


 At 04:52 PM 1/9/2013, andresdagm wrote:
good evening group.

I am modelling a building, it usually takes 4 hours runing the model, but suddenly takes 15-20 hours. what i see is that the simulation takes too much time (many hours) in initializing outdoor environment for surfaces...

I don't know what i can do. I didn't have change nothing.

thank you group...

Dante García



------------------------------------


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/






__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___