In designbuilder you can get a distribution of the temperatures (to choose between total hours or just during occupation)
Very east to get a quick total view of the amount of temperatures above a certain value ( eg in summer 25 °C)
I was looking for a report output in energyplus which would give me the same result. (using Xesoview, openstudio, doesn't matter..)
Best regards
Geert
Van: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] Namens Jim Dirkes
Verzonden: 07 February 2013 12:42
Aan: EnergyPlus_Support@xxxxxxxxxxxxxxx
Onderwerp: RE: [EnergyPlus_Support] temperature distribution report
What is “a report of the temperature distribution as in DesignBuilder”?
Have you used Dview? DesignBuilder’s Results Viewer?
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Geert Bellens
Sent: Thursday, February 07, 2013 6:25 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] temperature distribution report
Is there any way in E+ to get a report of the temperature distribution as in Desingbuilder?
Geert Bellens
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___