Hi, HJ
Same as a partition wall or inter zone surface. The partition has two constructions using the same set of material in different oders. (Normal and reversed)
Outer layer of a floor has the same material as the inner layer of a roof or ceiling. The two constructions are used onr st s time.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: wanghaojie630@xxxxxxxxx
Date: Fri, 8 Feb 2013 11:07:17 -0500
Subject: [EnergyPlus_Support] Interior roof and floor
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
Same as a partition wall or inter zone surface. The partition has two constructions using the same set of material in different oders. (Normal and reversed)
Outer layer of a floor has the same material as the inner layer of a roof or ceiling. The two constructions are used onr st s time.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: wanghaojie630@xxxxxxxxx
Date: Fri, 8 Feb 2013 11:07:17 -0500
Subject: [EnergyPlus_Support] Interior roof and floor
Hi all,
I have a two story building and thus will have interior roof and floor.
I wonder does Energyplus calculate the interior roof and floor as one
surface or as two surfaces (i.e. floor+roof). I used Openstudio to
create building model and it defines two surfaces as interior roof and
floor separately, but their material are the same. So I wonder if E+
treat the two surfaces as one?
Thanks,
HJ
I have a two story building and thus will have interior roof and floor.
I wonder does Energyplus calculate the interior roof and floor as one
surface or as two surfaces (i.e. floor+roof). I used Openstudio to
create building model and it defines two surfaces as interior roof and
floor separately, but their material are the same. So I wonder if E+
treat the two surfaces as one?
Thanks,
HJ
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___