Geert,
You might want to use Refrigeration:Case and related objects – those are intended for cold chambres and the temperatures you mention.
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Geert Bellens
Sent: Sunday, February 17, 2013 6:43 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Lowest temperature for PTAC ..?
I'm simulating two simple zones with only cooling, no heating, no ventilation. In real life these zones are cold chambres for the meat industry with temperature 8°C and 2°C with their one split unit.
I just want to evaluate the difference in cooling energy when the building is better insulated.
Using a simple PTAC, I can cool these zones, but the lowest temperature seems to be 7°C. Can I go lower with a PTAC?
Is there maybe a better (and quick) way to cool these zones ?
Geert
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___